Cisco 7921g Usb Install Windows

Mar 31, 2018 - Cisco Unified Wireless IP Phone 7921G. 792x USB Driver Support for Microsoft Windows 7. The 792x USB Driver Support for. To install the.

Hi,you might have seen this several times,but please take a minute to read. My phone is stuck in recovery mode.I connect it to usb, the computer asks me for drivers. I found the good page on the website to download it, but it requires me a service contract or something.The model is 7921G. I called Cisco directly, and we verified with the serial number, there is no contract or anything attached to this phone and there is no possibility that I can have support for it.Now my question is: how could i possibly download the drivers if cisco won't help me.

Is there anyone who can help me out?Is it against the rules to share?If not,can anyone share to me? I am quite desperate, and I would be really grateful for anything you could do for me.

Thank you very much! Using the USB Connection for Initial Phone Configuration To setup new phones for deployment to users, use your PC to enter the initial configuration for the wireless network settings and network profiles. To save time during initial deployment, you can create a standard network profile template and export it to several phones. See these sections for information about initial phone configuration: Setting Up Your PC to Configure the Cisco Unified Wireless IP Phone 7921G Before you can configure phones using the USB connection, you must install drivers and set up the USB ports on the phone and PC. To interface with the phone and web pages using the USB cable, the PC must run one of these operating systems:.Windows 2000 Professional.Windows XP These sections provide information about setting up your PC: Installing the USB Drivers To install the drivers on your PC, follow these steps: Procedure. Step 4 The driver installation is complete when you see the finished screen. You can close the wizard.

• Windows XP: Click the Remove or Change/Remove tab (to the right of the program). • When you find the program CES EduPack 2013, click it, and then do one of the following: • Windows Vista/7/8: Click Uninstall. • On the Start menu (for Windows 8, right-click the screen's bottom-left corner), click Control Panel, and then, under Programs, do one of the following: • Windows Vista/7/8: Click Uninstall a Program. • Windows XP: Click Add or Remove Programs. 2013

Step 5 Plug the USB cable into the USB port on the PC and into the USB connector on the phone. The Found New Hardware Wizard dialog opens. Step 6 To update the new software, click the button next to Yes, this time only and click Next. Step 7 Click the button next to Install the Software automatically (Recommended).

After 2-3 minutes, the software installs and a message appears on the task bar stating 'Found New Hardware - Software installed and ready to use.' Step 8 Click Finish when the installation is complete.


The phone briefly displays 'USB Connected' on the status line. For More Detail, Please click the below links: Link-Installation Link-Backup and Recovery Link-Full Guide.